PH Range: 3.5-8 PH (3.5-6.5 ACID, 7 NOR, 7-8 ALKALI)
Moisture Range: 1-10 (1-3 DRY, 4-7 NOR, 8-10 WET)
Relative Light: 0-2000 lux (0-200 LOW, 200-500LOW+, 500-1000 NOR 1000-2000 HGH)
Size: 6 x 28 x 5cm [2.36 x 11 x 2″]
Probe length: 18cm [7.1″]
Copper probe diameter: 4.8mm
Alu probe diameter: 5.1mm
Distance between probes: 1.2cm
Package weight: 107g
Step 1: Switch moisture/pH/light position
Step 2: Stick the probe into the soil about 2-4 inches
Step 3: Adjust the position of the probe until the pointer on the dial swing slightly
Step 4: After 10 minutes, Note moisture/pH/light level in the dial
Step 5: Remove probe from soil and wipe clean after each use
1. Do not touch the stone or hard rock soil, if the soil is too hard and dry, easy to damage the probes.
Copper and Aluminum itself does not belong to the hard material, so if the soil is too dry and hard to insert, you can use auxiliary agricultural tools drill hole and then insert.
2. Design for testing soil ONLY.
Do not be used to test pure water or other liquid, electrolytic response index will be affected, can only be used to measure the soil.
3. After using, need to clean and wipe the probes. Don’t be inserted in the soil for a long time while using.
3 in 1 Soil Tester X 1
-Multi-function: Combines moisture meter, PH acidity and light sensor together to provide you a comprehensive idea about the soil condition of your garden and lawn.
-Easy To Use: No Battery needed. Simply insert the meter in the soil area you want to check and instantly get an accurate and precise reading.
-Indoor & Outdoor Use: Compact and portable design, convenient for indoor or outdoor use.
-18 Month Warranty: We take care of all quality-related issues with a REPLACEMENT or REFUND for 18 months.
-Notice: To avoid damaging the electrode, please clean the electrode after use, do not use in soil with stones and insert forcibly.