Size: 6 x 28 x 5cm [2.36 x 11 x 2″]
Probe length: 18cm [7.1″]
Copper probe diameter: 4.8mm
Alu probe diameter: 5.1mm
Distance between probes: 1.2cm
How to use:
Step 1: Switch moisture/pH/light position
Step 2: Stick the probe into the soil about 2-4 inches
Step 3: Adjust the position of the probe until the pointer on the dial swing slightly
Step 4: After 10 minutes, Note moisture/pH/light level in the dial
Step 5: Remove probe from soil and wipe clean after each use
1. Do not touch the stone or hard rock soil, if the soil is too hard and dry, easy to damage the probes.
Copper and Aluminum itself does not belong to the hard material, so if the soil is too dry and hard to insert, you can use auxiliary agricultural tools drill hole and then insert.
2. Design for testing soil ONLY.
Do not be used to test pure water or other liquid, electrolytic response index will be affected, can only be used to measure the soil.
3. After using, need to clean and wipe the probes. Don’t be inserted in the soil for a long time while using.
Package Included: 1 x 3 in 1 Soil Tester
Find out what your garden or lawn needs with a little help from our soil test kit! You can now know whether you need to water your soil, amend its pH levels or adjust its lighting!
Our premium soil tester saves you both precious time and money, by helping you maintain your soil and, consequently, your garden or lawn in tip-top condition!
No need for batteries or preparation; you simply plug our soil tester in the soil area you want to check and instantly get an accurate and precise reading!
Indoor or outdoor use